Click the question summary for the complete question and answer.
|
|---|
| Question |
I am trying to purchase the PING cap that Ryan Moore wears. Are they available? If so, how can I purchase one..... |
| Answer |
.
.
Due to the many requests, the hat you are referring to, the PING Ranger Cap, is being added as a 'drop-in'.
PLEASE NOTE: This is a very Li....
|
|
| Question |
IMPORTANT
NOTE!!!: If you are buying PING clubs over the internet, or from ANYONE
who is NOT an authorized PING retailer, BEFORE bidding or buying PL.... |
| Answer |
........ |
|
| Question |
What should the shaft angle be for an Anser 4 when the sole of the putter is flat on the ground? (not loft/lie).... |
| Answer |
Shaft angle and lie angle are the same thing - the standard lie angle for all PING putters is 20 degrees from vertical..... |
|
| Question |
Can Ping refinish my irons? What does this entail?.... |
| Answer |
Yes,
we can re-tumble the iron heads. This service is not available on any
irons made of copper or nickel (BeCu, BeNi). This service does include
buff.... |
|
| Question |
I lost the little black piece out the back of my iron. Can you send me one to replace it?.... |
| Answer |
First
of all, I am sorry to hear about this. We are not allowed to send out
the back-weights. This is because there are many different weights and
we .... |
|
| Question |
I
would like to change the swing weight of my i3 Blades can that be done
at home or would they have to be sent in? Isn't it just a matter of
changing.... |
| Answer |
The
swing weights of the i3 irons can be adjusted (within certain
limitations), and the clubs would need to be sent to us for the
adjustment. We do ju.... |
|
| Question |
I
would like to change the swing weight of my i3/i3+/G2/G5/i5/S59 irons,
can that be done at home or would they have to be sent in? Isn't it
just a ma.... |
| Answer |
The
swing weights of the irons can be adjusted (within certain
limitations), and the clubs would need to be sent to us for the
adjustment. We do just .... |
|
| Question |
I would like the registration form for a hole-in-one. Where can I get one?.... |
| Answer |
Please
click on this link, complete the form in your browser, then print it
and have it attested by your playing partners and golf professional.
G....
|
|
| Question |
When are the new PING RAPTURE clubs going to be available to the public?.... |
| Answer |
The
new PING RAPTURE line is estimated to begin shipping September 1, 2006,
to those pro shops/retailers that have placed orders for them, and
oldest .... |
|
| Question |
Is the new RAPTURE series a replacement for the G5 or the i5 clubs?.... |
| Answer |
Actually, the new PING RAPTURE line is 'in addition to' the very popular PING G5 and PING i5 lines..... |
|
| Question |
When will the new PING RAPTURE clubs be available to the public?.... |
| Answer |
The
new PING RAPTURE line is estimated to begin shipping September 1, 2006,
to those pro shops/retailers that have placed orders for them, and
oldest .... |
|
| Question |
Hi,
my question is simply this. I lost my Zing2 pitching wedge and I can't
find a replacement anywhere. Could you send me one ?? The shaft is a
JZ. .... |
| Answer |
PING
does not sell direct to the consumer. Our clubs are priced
individually, and replacements/fill-ins can be ordered through a local
golf professio.... |
|
| Question |
Can the lie angles of my PING EYE2 irons be adjusted?.... |
| Answer |
Please see the Maximum Lie Angle Adjustability chart on the
http://www.pinggolf.com/global_repair.html
page of our site.
The cost for lie angle ....
|
|
| Question |
What shaft length will I need?.... |
| Answer |
With
the PING Fitting System the proper shaft length depends largely on your
height. Generally taller golfers require longer clubs while shorter
golf.... |
|
| Question |
What
is the difference between some of the iron shafts PING does offer and
has offered? (CS-Lite, Z-Z65, JZ, ZZ-Lite, DGS, DGX, KT, KTM,
Microtaper).... |
| Answer |
Here is some information on some of the most recent PING iron shafts.
CS-LITE (Regular & Stiff): Weight: 93.9 (R), 107.3 (S) Torque: 1.8 (R), 1.7 (....
|
|
| Question |
Is it possible to put a spine aligned shaft from golfsmith into my driver?.... |
| Answer |
PING
has a relationship with all shaft manufacturers and it is our policy to
purchase shafts directly from them. We do offer shaft stabilization.
This.... |
|
| Question |
Can I have my Ping irons reshafted with graphite shafts? They are steel shafts now..... |
| Answer |
In our older model irons:
K1,K2,K3,K3A,Eye,Eye2,Eye2+,Zing,Zing2,ISI,ISI-K, ISI-S,
PING will only install graphite shafts in irons that were or.... |
|
| Question |
What are the fitting options for the G5 driver?.... |
| Answer |
The
G5 driver is available in 5 lofts (7.5, 9, 10.5, 12 and 13.5), 3 shafts
(Aldila NV, TFC 100, Grafalloy Prolaunch), 5 shaft flexes (L, Soft-R,
R, S.... |
|
| Question |
What are the main differences between ISOFORCE and ISOPUR and ISOPUR 2?.... |
| Answer |
The
insets are made of different materials to give different feel. The
Isoforce putters have metal pixel insets, the Isopur putters have a
poured elas.... |
|
| Question |
I
am having trouble hitting the new PING product I just purchased. Is
there any way that I can trade this in for a different model/shaft?.... |
| Answer |
We
do not buy, trade or exchange new or used PING equipment. You would
have to check with the PING retailers in your area for information
regarding th.... |
|
| Question |
Where can I buy a PING Backpack, duffle bag, shoe bag, cart mittens, towel, hat? And how much do they cost?.... |
| Answer |
All
of our equipment and accessories can be purchased through any local
golf course, driving range or golf store pro shop that has an account
with PIN.... |
|
| Question |
I need to have the hosel position changed on my TiSI/TiSI Tec/Si3 driver. Can this be done and how much does it cost?.... |
| Answer |
It
is possible to have a hosel change made in the PING TiSI/TiSI Tec/Si3
driver. The hosel and shaft are removed, and the old hosel and shaft
are not.... |
|
| Question |
Please explain all the hosel designations in your Ping Tisi driver.(Example)RUD,RUH,RSO,RSS,& etc..... |
| Answer |
The
hosel codes and other information about the TiSI drivers can be found
at our website, www.PING.com, under the metal woods, classics
catagory..... |
|
| Question |
Do
you still make a putter that had the middle section hollowed-out and
made a distinctive 'ping' sound, almost like a tuning fork? What is the
model?.... |
| Answer |
The
putter you are referring to is the PING 1-A putter. The PING 1-A
putters are still in production, and can be ordered new through any
local PING r.... |
|
| Question |
What are the available lie angles for the PING MB wedges?.... |
| Answer |
The new PING wedges can be ordered in any of the 10 color codes of PING irons, from Maroon (5 upright) to Gold (4 flat)..... |
|
| Question |
What were the lofts of the ZING laminated fairway woods?.... |
| Answer |
The lofts for the PING ZING laminated (wooden) fairway woods are:
#3 = 16.5
#4 = 19
#5 = 22
#6 = 25
#7 = 29....
|
|
| Question |
I have lost my EYE2 BeCu 8 iron and would like to purchase a new one. Where can I get one?.... |
| Answer |
The
EYE2 BC irons are only available (inventory permitting) as single
irons, for replacement purposes ONLY, with the serial number from an
existing se.... |
|
| Question |
I was wondering if you had pictures and descriptions of the different types of putter grips..... |
| Answer |
The PING putter grips are pictured and described on our web site. They can be found by searching for key word "grips"..... |
|
| Question |
I'm
am looking for information on a putter I own. I have a bronze colored
Ping 1-A putter from Karsten MFG, Corp, with Phoenix, Arizona printed
on th.... |
| Answer |
The
PING 1-A putters were the putters that started it all. The PING 1-A
putters were introduced in 1959, are still in production to this day,
and can .... |
|
| Question |
Could you please give me the standard lie angles for each of your TiSI Tec fairway metals?.... |
| Answer |
The standard lie angles of the TiSI Tec fairway woods are:
#3 = 58.50
#5 = 59.00
#7 = 59.50....
|
|
